How To Install Mass Loaded Vinyl

Vinyl Pinstripe Installation Tricks

by Don Kress

Goodshoot/Goodshoot/Getty Images

Vinyl pinstripes are piece of cake to install on your vehicle. Unfortunately, they're also piece of cake to install incorrectly. This becomes evident while you're actually applying the pinstripe, as by and large you end up with a stripe that's too high on one side of the car and too depression on the other side of the car. Professionals take a special way of installing vinyl pinstripes, though, that virtually eliminates having to unstick and restick the pinstripe several times before getting it right.

Surface Preparation

For the pinstripe to properly adhere to the surface of the car, the paint must exist cleaned before application of the pinstripe. While you won't have to sand or otherwise scuff the surface, you must make certain that the panels the stripe is practical to don't have any wax or clay on them. Wipe the area in which the stripe is to be installed with a clean fabric dampened with rubbing alcohol. The alcohol acts equally a very mild solvent to remove grease, dirt and wax. In addition, information technology evaporates quickly, leaving no residue.

Installing the Pinstripe

Kickoff, peel off an inch or 2 of the white paper bankroll of the pinstripe. Stick this part to the front fender of the vehicle where you want the pinstripe to brainstorm. Adjacent, unroll the pinstripe, pulling the newspaper backing off as yous go, but keeping the pinstripe away from the vehicle. When you get to the back of the vehicle, line up the pinstripe to create a slight curve on the fender, and so eyeball the pinstripe to make it parallel to the lesser of the vehicle's side windows. Pull the stripe tight, so gently motion it toward the vehicle. It will stick gently in identify. Finally, press the pinstripe on the vehicle, and then remove the clear plastic top portion of the pinstripe to consummate the installation.

Where to Install the Pinstripe

Pinstripes are almost universally used to decorate the chugalug line of the vehicle. The chugalug line is only beneath the side windows. Even so, you lot can apply vinyl pinstripe practically anywhere on the vehicle yous want. You can employ it as an embellishment on difficult, smoothen surfaces in the interior of the vehicle, or as a dividing line between the colors of a two-tone vehicle. Considering vinyl pinstripes are flexible, you can even lay out a set of pinstripe flames on your vehicle with them.

Finishing Techniques

Uncomplicated finishing techniques for vinyl pinstripes are usually the best. Later on you have applied the pinstripe and removed the clear plastic top, use a razor blade to gently cutting a smooth, abrupt edge on the front and back of the stripe. In improver, if you don't printing downwardly the pinstripe as well quickly, y'all can peel up the last or first inch of 1 of the stripes, angle it upward and over the second function of the pinstripe, and then have them encounter at the end, giving the stripe a dramatic and professional touch.

References

Author Bio